 |
Belkin Router |
Please refer to your user manual for instructions.
Click here to download the user manual for Belkin routers |
|
LinkSys Router |
Please refer to your user manual for instructions.
Click here to download the user manual for LinkSys routers |
 |
Netgear Router |
- Connect to the router by typing http://www.routerlogin.net in the address field of your browser, then click Enter.
- Enter admin for the router user name and password for the router Password, both in lower case letters.
- Enter the default Perlico User Name: perlico@perlico.com and Password: broadband.
|
 |
Netopia Router |
- Open your web browser (Internet Explorer or other). Enter http://192.168.1.254 in the web browser’s Address field.
- Press the Enter Key.
- If required, login with user name admin and password admin.
- Click on the Manage My Account link on the left hand side, if available. (Otherwise click on the Expert Mode link in the left-hand side menu (if that link is visible). In the Expert Mode Confirmation screen click on Ok to Continue. In the upper menu bar, click on Configure. Click on the Quickstart Link).
- Enter the default Perlico Username: perlico@perlico.com and Password broadband.
- Click on the button to save these entries.
|
 |
ZyXel Router |
- Open your browser and enter http://192.168.1.1 in the Address field. Press the Enter key.
- Login with user name admin and default password is 1234 (although you may have changed this at some point. In which case, enter your own password here). If you are prompted to change your password, click Ignore to continue. It is recommended however that you change the password for your router/modem for security reasons.
- Click Wizard Setup.
- On the first page of the Wizard Setup, click Next.
- On the second page, remove any username and password and enter the default Perlico username: perlico@perlico.com and password: broadband.
- Click Next.
- On the next page, Log On To The Internet (or Save Settings ).
|